If you’re not quite sure how Section 179 can actually save you money when you buy an embroidery machine, give Carrie Radloff at Red Thread a call and let her explain it. She can also help you explore their finance programs – they might have just what you need to put a Happy Embroidery Machine under your Christmas Tree this year! Ok, too big for the tree – just put it straight into your workroom.
In Part 1, I removed an old Monogram from a very loose weave, loopy Blanket so that I could replace it with a new Monogram. Time to show you the Replacement Monogram!
I know the blues are different but trust me, the blankets are the same. The pictures were taken in different rooms with different cameras.
I used the same technique on this Blanket that I used in the Posts on Christmas Stockings and “Busy” Fabric. I created the Monogram first and then created an Outline of the Monogram that followed the shape of the Monogram. I made two copies of this Outline and Filled each with a large gap between the lines of stitching. I reversed the Angles of the two Outlines so that the stitches formed a CrossHatch pattern. I placed the Monogram on top of these two Outlines so that it would stitch last. I did not put a Satin Border around these two Outlines because I did not want to call attention to them on the finished Blanket. I wanted the Monogram to be the “Star of the Show” and the CrossHatch stitches to recede into the background and just do their job – hold down those blanket loops so my Monogram would not sink down into them or be “eaten” by them over time and washing.
I used Black Tearaway instead of White under the Blanket so any edges or fibers left behind after tearing would blend in better with the Blue Blanket. I used a Black Bobbin Thread so that it also would blend in visually with the Dark Blue of the Blanket when viewed from the back. I used a Magnetic Mighty Hoop so that the thickness of the Blanket was not an issue! Mighty Hoops work beautifully with Towels, Carhartt Jackets, Purses, Bags, Quilts, etc.
I used a light weight Water Soluble Topping (WST or WSS) to help hold back the loops during the embroidery process. I Hoop this topping along with the Backing and Blanket so that it is tight against the top of the blanket rather than just Floating or laying it on top. When finished, this topping tears easily away from the edge of the CrossHatch Fill Stitches.
The CrossHatch Fill Stitches do their job, they hold back the loops and almost disappear into the background of the blanket, allowing the Monogram to really be the Star of the Show.
Maybe you should shift your perspective. Focus on the “Bites” – the Monthly Payments.
See for yourself just how much it would take to put that Happy Embroidery Machine in your workroom.
Check out Red Thread’s Online Payment Calculator. Don’t forget, you don’t have to finance the entire cost of the machine. My best advice? Give Red Thread a call and let them help you explore your options – 877.237.7287. www.RedThreadFinancial.com
You can even Apply Online – Apply Now
I recently was given a Monogrammed Throw Blanket to Re-Work. The original Monogram was done with a very wide Satin Stitch. This kind of stitch does not “wear” well as the stitches can be very loose and prone to snagging and pulling. In addition, if you look closely, you can see the loops of the blanket actually beginning to work their way up through the embroidery thread. A Water Soluble Stabilizer (WSS) used as a Topping at the time of the original stitchout held these loops back. With time, and washing, this topping dissolves and is no longer able to hold these loops back. The same thing happens with a Terry Cloth Towel or a napped fabric like the Christmas Stocking featured in previous posts. Even if you don’t wash the item, Water Soluble Stabilizer dries out over time and can become brittle and flake away underneath the embroidery design if there is enough room under the stitches as in the embroidery below.
Fortunately for me, the same thing that makes this stitch style a bad choice for the blanket, makes it a very easy “fix”. I simply slid the tip of my Snip EZ Scissors and Snip, Snip, Snipped my way across, underneath the Bobbin Thread. The Squeeze Action of these Scissors make them a dream to use for cleaning up thread tails on the back of designs as well as this type of project. I especially love these Snips because they are so easy on my hands. My thumbs no longer work well and my fingers are stiffening up. I can use these for extended periods with very little pain in my hands. Even when you have good hands, working regular Scissors for long periods can become quite painful.
With the Happy Embroidery Machine, we offer Commercial Japanese-made Quality at better than home market machine prices.
Whether you are